Parameter

Ra = 81    

Power: 8W

LED qty: 174 pcs

Luminous flux: 810lm

Size: (D)30mm * (L)600mm

Voltage available: AC110-130V, and AC220-240V

Work Frequency: 50-60HZ

Tube Material: Glass or Transparent PC

Working Temperature:    -40 ~ 40 degree celsius

Color Temperature: 3000-3500K, 4000-4500K,  6000-6500K

Functions and Performances

1. Environment-friendly

Conventional fluorescent lamp contains lots of mercury steam and if the lamp was broken, mercury steam would be vaporized to the atmosphere. In contrast, LED fluorescent lamp does not contain mercury. Besides, the LED products do not contain any lead and thus they are environmental friendly products. Therefore, LED fluorescent lamp is well-known as the Green Lighting of the 21^st century.

2. Seldom Heat Generation

Conventional fluorescent lamp generates lots of heat, but LED lamp can converts all the electric energy into light so that it is energy-saving. Besides, LED lamp has no side-effect to the documents or clothes.

3. Noiseless 

The LED lamp does not make any noise, so it is a good choice to the sophisticated instrument. It can be used in the library and office.

4. No Flicker 

Conventional fluorescent lamp uses alternating current. Therefore, flash may occur 100-120 times in a second. However, In LED lamp, AC is changed into DC directly, and thus no flash occurs. So it is good for our eyes. 

5. Mosquitoes Annoy-free

Different from conventional fluorescent lamp, LED lamp does not emit untraviolet ray, which can attract mosquitoes around the lamp. Therefore, it helps to keep the room clean and tidy. 

6. Adjustable Voltage: 80v-245v

Conventional fuorescent lamp is lightened by the coming high voltage emitted by the ballast. It will not work if the voltage decreases. 

7. Energy-Saving and Long Lifespan

 The energy consumption of LED fluorescent lamp is less than 1\3 of that of the conventional lamp, but its lifepan is 9 times more than that of conventional lamp. So it can be used for a long time and theres no need to replace for a new one. Therefore, it saves money and is more suitable to use in the places where it is difficult to change a new lamp. 

Application

Widely used in Residential/Institution buildings, Hospital, Hotel,Factory,School, Parking garage, Supermarket,Meeting room etc.

Installation

Can be directly placed in conventional T8/T10 fluorescent bracket, firstly remove the conventional fluorescent lamp, take out the starter and ballast or shoting the ballast connect lines, and then put on the LED fluorescent lamp.